New Garage Doors in Sacramento, CA

If your garage door is not working properly after installation, it’s important to address the problem as soon as possible to ensure that the door is operating safely and correctly. Here are some steps to take if your garage door is not working properly:

1. Check the opener: Make sure that the opener is plugged in and that the power is on. Check the remote control batteries and make sure that the opener is programmed correctly.
2. Check the springs: Make sure that the springs are properly adjusted and that they are not broken. If the springs are damaged, they will need to be replaced by a professional.
3. Check the track: Make sure that the track is clear of debris and that it is properly aligned. If the track is bent or damaged, it will need to be repaired or replaced.
4. Check the opener’s safety sensors: Make sure that the safety sensors are properly aligned and that they are not blocked by debris.
5. Check the opener’s settings: Make sure that the opener’s settings are correct and that the force and limit settings are properly adjusted.
6. If you cannot find the problem or cannot fix it, it’s always best to contact the garage door installer or a professional garage door technician like Paramount Garage Doors, we have the experience and knowledge to help diagnose and fix the problem.

It’s important to keep in mind that if you are unsure or do not have experience in fixing a garage door, it is always recommended to contact a professional garage door technician who can help you diagnose and fix the problem safely and correctly.

Proper maintenance is important to ensure that your new garage door lasts for many years and operates smoothly and safely. Here are some tips for maintaining your new garage door:

1. Keep the door clean: Regularly clean the door with mild soap and water to remove dirt and grime. Be sure to rinse the door thoroughly and dry it with a soft cloth.
2. Lubricate the moving parts: Lubricate the moving parts, such as the rollers, hinges, and springs, with a high-quality lubricant to reduce friction and wear.
3. Tighten loose hardware: Check the screws and bolts that hold the door in place and tighten any that are loose.
4. Balance the door: Check the balance of the door by raising it halfway and letting go. If the door stays in place, it is balanced. If it moves up or down, the springs may need to be adjusted.
5. Check the weather stripping: Inspect the weather stripping around the door to ensure that it is in good condition and that it is sealing properly.
6. Check the opener: Test the opener by opening and closing the door several times. Make sure that the opener is working correctly and that the door is opening and closing smoothly.
7. Regularly check the rollers and tracks for any dirt, debris or any damage, make sure to clean them if needed.
8. If you notice any issues with your garage door, it’s always best to contact a professional garage door technician like Paramount Garage Doors, they can help diagnose and fix the problem.

Regularly maintaining your new garage door will help ensure that it lasts for many years and operates smoothly and safely. If you have any doubts or concerns, it is always recommended to contact a professional garage door technician for advice.

Installing a garage door can be a complex and dangerous task, and it’s important to keep safety in mind throughout the process. Here are some safety concerns to keep in mind when installing a new garage door:

1. Make sure the garage door opener is properly disconnected before starting the installation. This will prevent the door from moving while you’re working on it.
2. Wear safety glasses and work gloves to protect yourself from flying debris or sharp edges.
3. Use a ladder or scaffolding that is sturdy and secure. Make sure to follow the manufacturer’s instructions for setting up and using the ladder or scaffolding.
4. Use the proper tools for the job and make sure that they are in good condition.
5. Be aware of the tension on the torsion springs and extension springs when working on the door. These springs are under a lot of tension and can cause serious injury if they are not handled properly. THIS INCLUDES DEATH! FOR YOUR SAFETY WE HIGHLY RECOMMEND CONTACTING A GARAGE DOOR PROFESSIONAL.
6. When installing the garage door opener, Make sure to follow the manufacturer’s instructions and make sure that the opener is properly secured to the door and the ceiling.
7. Make sure to test the door’s balance and tension after installation to ensure that the door is properly adjusted and that it opens and closes smoothly.
8. It is always recommended to hire a professional and licensed garage door installation company like us here at Paramount Garage Doors, we have the experience and knowledge to ensure the job is done safely and correctly.

Remember, installing a garage door is a complex task that requires knowledge, skill, and experience. If you are not comfortable with the process, it is always best to hire a professional.

Measuring your garage door opening for a new door is an important step in the process of purchasing and installing a new garage door. It is important to have accurate measurements to ensure that the door you purchase will fit properly and function correctly. Here are the steps to measure your garage door opening:

1. Measure the width of the door opening. Measure the distance between the inside of the left and right jambs (vertical framing on the sides of the door opening) at the top, middle, and bottom of the opening. Use the smallest measurement for the width of the door opening.
2. Measure the height of the door opening. Measure the distance between the inside of the header (horizontal framing above the door opening) and the finished floor.
3. Measure the depth of the door opening. Measure the distance from the back of the garage wall to the front of the door opening. This will be the depth of the door jamb.
4. Measure the distance from the floor to the ceiling.
5. Measure the height of any existing hardware on the door such as the garage door opener, springs, tracks and etc.

It’s important to note that measuring the garage door opening is a crucial step in the door installation process, and should be done accurately to ensure a smooth installation. If you have any doubts or concerns, it is always recommended to contact a garage door company like us here at Paramount Garage Doors. We will handle all of measuring and walk you through the simple process of picking out the best garage door for your Sacramento home.

There are several factors to consider when choosing the best type of garage door for your home. These include:

1. Style: Consider the style of your home and choose a door that complements it. A carriage-style door can add a traditional touch to a home with a lot of architectural detail, while a modern full-view door can give a contemporary home a sleek look.
2. Material: Consider the material of the door, and choose one that is suitable for the climate and weather conditions in your area. For example, if you live in a coastal area, you may want to choose an aluminum or fiberglass door that is resistant to salt corrosion.
3. Insulation: Consider the insulation of the door, especially if you have a living space above or next to your garage. Insulated doors will help keep your garage and living space more comfortable and energy-efficient.
4. Security: Consider the security of the door. Automatic doors come with many security features such as rolling code technology and safety sensors that can provide added protection.
5. Maintenance: Consider the maintenance required for the door. Steel and aluminum doors are low-maintenance, while wood doors require more maintenance such as painting or staining.
6. Budget: Consider your budget and choose a door that fits it.

It’s always best to consult with a professional garage door expert like Paramount Garage Doors, we can help you evaluate your needs and recommend the best type of garage door for your home.

The most common materials used for garage doors are:

1. Steel: Steel garage doors are durable, low-maintenance, and affordable. They come in a variety of designs and finishes, and they are available in insulated and non-insulated options. They are also resistant to fire, termites and other pests. However, they can dent or rust over time if not maintained properly.
2. Aluminum: Aluminum garage doors are lightweight, rust-resistant, and low-maintenance. They are also a great option for coastal areas, as they are resistant to salt corrosion. They come in a variety of designs and finishes, but they are not as strong as steel.
3. Wood: Wood garage doors are a traditional option, and they are available in a variety of designs and finishes. They can be painted or stained to match the exterior of your home. They are also insulated and provide a good sound barrier. However, they are not as durable as steel or aluminum and require regular maintenance, such as painting or staining and weatherproofing.
4. Fiberglass: Fiberglass garage doors are similar to aluminum garage doors in that they are lightweight and low-maintenance. They are also resistant to rust, rot, and corrosion. They are a good option for coastal areas, but they are not as strong as steel or wood.
5. Vinyl: Vinyl garage doors are similar to fiberglass garage doors in that they are low-maintenance and resistant to rust, rot, and corrosion. They are also energy-efficient, but they are not as strong as steel or wood.

Ultimately, the best material for your garage door will depend on your budget, location, and personal preferences. It’s always best to consult a professional at Paramount Garage Doors to help you decide which one is best for you.